–
–
–W
–rpm
–bpm
–demand
Sensors:HRPower
Settings
Rider
Saved per rider: FTP, heart rate, Heat from CORE and its levels, Decide by, fan response, the step up / down levels below, the heart-rate strap and the CORE sensor (Sensors). Everything else is shared. Decide by and Fan response save as soon as you pick; for the rest a bar with Save appears at the bottom.
With a CORE body temperature sensor: from the heat strain below the fan runs at least at level 2 or 3 while you ride (CORE's heat zones: 3 = adjust pacing, hydrate and cool; 7 = harmful). It lets go 0.5 lower. The tick box saves at once.

Auto: step up when demand ≥

0.70 = 70 % of FTP or of heart-rate reserve. In training zones: Help → How Auto decides.

Auto: step down when demand <

Timing
Wi-Fi and address

Your Wi-Fi

Saving reboots the fan, which turns it off.

The fan's own Wi-Fi

WattWind-XXXX, for setting up, and when your Wi-Fi isn't there.

The fan's name

The page opens as http://name.local. Give each fan its own name if you have several.
PIN
Sensors
Heart rate:
Power:
CORE:

Share heart rate

For a strap that allows only one connection: the fan shows itself as a heart-rate sensor, and your app or watch connects to the fan instead of the strap. One app or watch at a time. Saved at once.
Linked fans
Maintenance

Backup

Save the settings as a file (riders, thresholds, sensors, timing, Wi-Fi name) and restore them on this fan or another one, for example after swapping the Pico. Passwords and keys only if you tick the box.

Firmware update

Pick a wattwind-update-….tar file. The fan turns off while the files come in, checks every file, then restarts with the new version (about a minute; usually only a few files change). Your settings stay. Check for updates asks GitHub from this phone or computer (not from the fan) whether there is a newer version.

Detailed recording

For finding a problem: for 24 h the fan records every second what it gets (power, cadence, heart rate) and what it does, plus its connections, in a file of its own. Start it, ride until the problem shows, then download it and send it with your report. It stops by itself after 24 h and is deleted 7 days later (or with Delete). It holds your heart rate: share it only with someone you trust.
No recording.

Restart

Erase everything
Before giving the fan away, or to start again: deletes all settings, riders, sensors, the Wi-Fi network, PIN, link keys and the logbook. The fan restarts as new, with its own access point and the default password. Firmware stays.